What I did to help the Stickers to stay stuck was to get a sink with some warm Soapy water,and the Soap I used was Dawn Dish Washing Soap.There's a film that's on the Rattler from the Factory that keeps the Stickers from staying stuck,and the Dawn cut's the Film so the Stickers have a good clean surface to stick to.Then use a Soapy Wash Cloth to wash the Rattler with,and then after washing it really good rinse it off and dry it with a soft Towel.After doing this the Stickers went on alot better,and after almost 2 months there all still stuck on there with no signs of coming loose.I think if you guy's try this you won't have any trouble with the stock Stickers wanting to come off.But even though this trick helps with keeping the stock Stickers stuck,they still look like there printed on cheap looking Scotch Tape....